Il fait froid dehors, temps de cochon, et l’inspiration vous manque ?
Un peu de mécanique ici :
I used the Canon 5D MK II to make the video. All my lighting was created using my Profoto strobes, but using only their modeling lights. Modeling lights aren’t made to light complete sets but rather to give you an idea of what the stobe light is going to look like when if fires off. Because of this they are low powered lights, I compensated by shooting at ISO 800.
For the motion I used either the zoom and focus on my lens or a Steadicam Merlin. While I was filming the section with the chrome lamp (with the steadicam) my reflection was very prominent. I had to cover my face and hands with black fabric to minimize my reflection!
Both the opening shot with the two white desk lamps and the closing shot of the group of lamps were captured using stop motion. I used Capture One to shoot tethered with the Canon 5D. The photos were then brought into Aperture to resize and touch up. Dust was really obvious on the black surfaces, yet with Aperture I was able to clean the dust off one photo and then apply it to all the other photos—saving my hours of work.
In order to turn the wire lamp so smoothly I used an old VR turn table. It was nice to be able to repurpose equipment I had on hand in the studio. And speaking of repurposing—the long plugs of the hanging lamps originally had lots of kinks in them. A good trick to straighten them out is to use a hot hair dryer. Finally, I used Final Cut Pro to assemble all the stop motion photos and video.
article © Point Nodal – décembre 2010